• Kreg® Accu-Cut™ + Rip Cut™ Combo Kit



(1) Universal Saw Sled
(2) 26.5" Aluminum Guide Tracks with Guide Strips
(1) Starting Block
(2) Track Connector Bars
(1) Aluminum Guide Rail
(1) Precision Edge Guide
Detailed Setup and Usage Instructions

 Accu-Cut™ + Rip-Cut™ Combo Kit


Break down plywood with ease by turning your circular saw into an edge-guided and track-guided cutting solution. Plus, switching between the Accu-Cut™ and Rip-Cut™ is a breeze with the Universal Saw Sled – so you never need to worry about setup changes.



High-performance track guide for straight and clean cuts

  • Rip, cross cut, and make angled cuts up to 50" long in plywood, MDF, and panels
  • Simply align the Guide Track with your marks to make accurate cuts
  • Hold track in place without clamps thanks to anti-slip guide strips
  • Prevent splintering with anti-chip strips that support material during the cut
  • Begin cuts easily with a Starting Block that supports the saw and allows normal blade guard operation
  • Mount almost any circular saw—left or right blade—to the Universal Sled
  • Universal Sled is compatible with the Kreg Rip-Cut™
  • Take your saw to the material instead of having to take your material to the saw


Set your projects up for success by making straight, accurate, splinter-free cuts with the Accu-Cut™ Circular Saw Track Guide. It rips, crosscuts, and makes angled cuts up to 50" long in plywood, MDF, and other large panels with accuracy and control.


The Accu-Cut™ guides your circular saw along an aluminum track that holds the saw steady and keeps your cuts straight. The track guide is designed for simplicity: just mount your saw to the Universal Sled, align the Accu-Cut™ track to the cut line, and make the high-quality cuts you need. The anti-chip guide strips prevent splintering and tearout through the entire length of your cut. The same strips also feature an anti-slip surface that holds the track in place without clamps.


Straight, accurate, repeatable rip cuts and crosscuts made easy

  • Make rip cuts and crosscuts up to 24" wide
  • Cut multiple pieces to the same size with just one setup
  • Use the oversize edge guide for precise control throughout the cut
  • Eliminate need for marking, measuring, and layout lines
  • Take your saw to the material instead of having to take your material to the saw
  • Universal Sled accepts most circular saws—left or right blade
  • Reversible edge guide for left- or right-handed use


The Rip-Cut™ turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut™, you can cut with the confidence you want and the precision you need.


The Rip-Cut™ easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut™ does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want—up to 24"—using the built-in measuring scale and then make your cut.


Write a review

Note: HTML is not translated!
    Bad           Good

Kreg® Accu-Cut™ + Rip Cut™ Combo Kit

  • Brand: Kreg
  • Product Code: KMA-Promo-Int 19
  • Availability: 1