Piusi Drum, Fuel Dispensing Pump System
Diesel transfer units for non commercial use. Easily connected to drums via a quick 2"BSP coupling
Fitted with telescopic suction tube for direct connection to fuel drums and with a nozzle holster which is located above the drum near the pump, for easy, clean operation.
Fitted with mechanical meters to ensure precise dispensing and control of single user consumption.
Wetted Components | Performance | |||
Pump Body | Cast Iron | Voltage / Frequency | 12vDC, 24vDC, 110vAC50Hz, 230vAC50Hz | |
Impellor Case | Cast Iron | kW | Various | |
Impellor Case Seal | Viton | RPM | 2900 | |
Motor Shaft Seal | Viton | Duty Cycle | DC 20 Minutes, AC Continuous | |
Vanes | Acetyl | Cable Length | DC - 6m, AC - None | |
Vane Springs | Spring Steel | Bypass Valve Y/N | Y | |
Rotor / Gear / Impellor | Cast Iron | Max Flow | 80 lpm (Bi-Pump DC Versions) | |
Shaft Key / Nut | Cast Iron | Discharge Pressure | 1.6 Bar | |
Motor Shaft | Cast Iron | Max Suction Lift (Dry) | 3.0 m | |
Bypass Valve Piston | Acetyl | Max Suction Lift (Wet) | 3.0 m | |
Bypass Valve Seal | Viton | Inlet Fitting | 1" NPT | |
Bypass Valve Spring | Spring Steel | Outlet Fitting | 1" NPT | |
Max Particle Tolerance | 100 Micron | |||
Max Liquid Temp | 57°c | |||
Max Room Temp | 40°c | |||
Thermal Protection Y/N | Y | |||
Max Liquid Viscosity | Diesel | |||
Ingress Protection | IP55 |
Piusi Transfer Pump for Diesel, Drum Series
- Brand: Piusi
- Product Code: 272P20 / 273P20
- Availability: 1