Cutting Tools

Refine Search


Dormer Center Drill (Inch)

Dormer Center Drill (Inch)

When one end dulls, turn the countersink around for a fresh cutting edge. The&nb..

Dormer Drill Bit Jobber Series Set

Dormer Drill Bit Jobber Series Set

ModelSizesSpecification# 31/16 - 3/8"by 64th ( 21 pcs./set )# 201/16 - 1/2"by 32th ( 15 pcs./set )# ..

Dormer Metal Slitting Saw 1" Bore

Dormer Metal Slitting Saw 1" Bore

These general purpose cutters are good for cutoff, slitting, and slotting application..

Dormer Metal Slitting Saw with Side Chip 1" Bore

Dormer Metal Slitting Saw with Side Chip 1" Bore

With peripheral and side teeth, these cutters remove chips for a consistent cutting w..

Dormer Screw Slotting Saw 2 3/4" Dia. x 1" Bore x 72T

Dormer Screw Slotting Saw 2 3/4" Dia. x 1" Bore x 72T

These general purpose cutters are good for cutoff, slitting, and slotting application..

Dormer Square Tool Bit

Dormer Square Tool Bit

Grind these hardened steel blanks to the size and shape you need...

Dormer Straight Shank Counterbore ( Inch )

Dormer Straight Shank Counterbore ( Inch )

SizeCap screw5/16 x 3/16"3/16"3/8 x 1/4"1/4"7/16 x 5/16"5/16"9/16 x 3/8"3/8"..

Dormer Straight Shank Counterbore ( Metric )

Dormer Straight Shank Counterbore ( Metric )

SizeCap screw11 x 6.4mm6mm15 x 9mm8mm18 x 11mm10mm20 x 14mm12mm..

Dormer Taper Shank Drill Bit ( Inch )

Dormer Taper Shank Drill Bit ( Inch )

Install the Morse taper shank directly into the tapered spindle on machines such as drill presses an..

FP Adjustable Reamer

FP Adjustable Reamer

To ream multiple hole sizes with the same tool, tighten or loosen the two nuts on the..

Garr Tool Carbide Burrs ( Ball Shape )

Garr Tool Carbide Burrs ( Ball Shape )

These are for curved surfaces, round slots, and round-bottom holes. These&n..

Garr Tool Carbide Burrs ( Cone Truncated Nose Shape )

Garr Tool Carbide Burrs ( Cone Truncated Nose Shape )

For curved surfaces and slots and curved holes with pointed bottoms...

Garr Tool Carbide Burrs ( Cylindrical Radius Shape )

Garr Tool Carbide Burrs ( Cylindrical Radius Shape )

For curved surfaces and slots and round-bottom holes and slots...

Garr Tool Carbide Burrs ( Cylindrical Shape )

Garr Tool Carbide Burrs ( Cylindrical Shape )

For straight edges and flat surfaces. These burs are for gradual metal removal with a fine..

Showing 31 to 60 of 207 (7 Pages)